Sensit Company
Loading

Resources

Sensit is currently reorganizing it's manufacturing facility and will begin production very soon. We are also designing some new erosion sensor products. Please stay tuned for updates.

Research Erosion Site Equipment Requirements

This research field site configuration would be suitable for basic wind erosion equation development (WEE). The calculation of U* (Ustar, or friction velocity) requires a minimum of three anemometers.  We suggest using four anemometers per site in case one fails.
 

1ea Sensit eroding mass sensor - (Sensit Company)

3ea anemometer (wind speed sensors) - (R M Young Company)

1ea wind direction sensor - (R M Young Company)

1ea air temperature sensor - (Campbell Scientific)

1ea sand catcher - (Custom Products (Dr. W. Fryrear), Big Spring, TX, USA)

1ea data system - (Campbell Scientific)

1ea tower - (Custom Products (Dr. W. Fryrear), Big Spring, TX, USA)

Eroding mass sensor - Model H11-LIN

 

 

Sensit Inc
1652 Plum Ln, STE 106,
Redlands, CA 92373-4594
US
Phone: 909 793 5816 or 909 289 9177 (cell)
Email: sensit@polarcomm.com

 

Sand Catcher - Model BSNE

Custom Products
7204 S Service Rd I-20 PO Box 319
Big Spring, TX 79720-0546
915 393 5517

web site http://www.fryreardustsamplers.com
email Dr. W. Fryrear

 

Temperature Sensor & Wind direction sensor

RM Young Company
2801 Aero Park Drive
Traverse City, Michigan 49686
Phone: 231-946-3980
Fax: 231-946-4772

 

Data Logger - Model CR3000

Campbell Scientific, Inc.

815 West 1800 North

Logan, Utah USA 84321-1784

Phone: 435.753.2342

Fax: 435.750.9540


Anemometers - wind speed/direction sensor - RM Young (preferred)
Met-One Instruments
1600 Washington Blvd.
Grants Pass, Oregon 97526
Phone 541/471-7111
Fax 541/471-7116

 

Never assume everything will simply work fine. It is a good idea to have recorded (and looked at) test data in the lab before setting up your site in the field. The field environment has few facilities to repair or rebuild.  And more often than not, your data acquisition program may be need adjustment such as data recording format.  

Always have backup anemometers. All anemometer bearings prematurely fail from dust. 

Middle Taklimakan Desert, CHINA

Notice the Sensiit model H11-LIN erosion sensors are mounted at two different heights.